SURFACE PREPARATION

Surface preparation is the most critical portion of any successful resions flooring system application. Work must be performed by trined or experienced contractors or maintenance personnel. Hygiepoxy service department is pleased to answer any questions. Before grouting,clean joints and the tile surface with a damp sponge to remove dust,dirt,and other contaminats. Do not leave water standing in joints. Do not clean tiles with acidcleaners.

MIXING

Empty entire contents of Part A and B into a clean mixing pail. With a slow speed drill or margin trowel, mix until liquids are completly blended. Add at least 3/4 of the TILE GROUT FILLER (more for wide joints) and blend until uniform.

 

CONSIDERATIONS

Substrate must be free of dirt,waxes,curing agents, and other foreign materials. protect form exposure to chemicals and harsh cleners until fully cured. Subtrate temperature must be a minimum of 50 degree F-Contact Hygiepoxy for Low Temperature Cure.

INSTALLATION

Pour mixed Hygiepoxy onto working area. Following standard epoxy and grouting techniques, apply to surface. Be sure all grouted joints are completely filled. Remove excess grout float. Do not leave excess grout on face of tiles. For complete installation instructions,contact Hygiepoxy Technical Service.

 

CLEAN UP

 

Some tiles and pavers can be stained by color pigments in Hygiepoxy Try small area to determine results before grouting entire surface. Clean skin with soap and water. Tools and equipment should be cleaned after work.